G U A R A N T E E

YOUR SOURCE FOR
bcs tillers, bcs sickle bars, bcs lawn mowers, bcs snowblowers, bcs brush mowers, bcs sweepers, bcs chipper / shredder
bcs attachments & bcs accessories
AND
 rotary plows, mini hay balers, hay rakes, spaders, cultivators, flail mowers, seeder, potato digger plow, utility trailers & more!

WALK-BEHIND TRACTOR ACCESSORIES
All prices shown on this website or on our invoices are in U.S. Dollars

Each tab above takes you to a page with a LOT of helpful information. The pages are long, so don’t forget to scroll all the way down the page so that you don’t miss anything.

PTO ACCESSORIES
(Power Take Off…where the implement attaches to the tractor)
 
QUICK COUPLINGS
 
This popular accessory allows you to change implements on your walk-behind tractor in 30-60 seconds without tools.  All they require is occasional light greasing, and the quick couplings will save you hours of time and the trouble of replacing worn implement mounting studs and nuts, especially if you have multiple implements you are changing in the same season.
 
ALL “KITS” include:  1 female (for tractor) and 2 males (for implements).  Extra males sold separately. 

KIT

FITS

ITEM NUMBER

RETAIL

SALE

Quick Coupling Kit
(1 female, 2 males)

BCS 710 - 853
(1995-current
taper-3-jaw PTO)

922.90825K

$255

$242

Extra Male for above

BCS 710 - 853
(1995-current
taper-3-jaw PTO)

922.90826

$88

$84

Quick Coupling Kit
(1 female, 2 males)

Grillo G85 - G107

954712KT

$180

$165

Extra Male for above

Grillo G85 - G107

954812

$65

$60

Quick Coupling Kit
(1 female, 2 males)

Grillo G110

946911KT

$240

$225

Extra Male for above

Grillo G110

946511

$89

$89

NOTE: see our Specials page to see current promotions on Quick Couplings with purchases of BCS model 732 through 853 Tractors, and Grillo G110 tractor.

GRILLO QUICK COUPLING (kit includes 1 female & 2 males)

NOTE: The Grillo G85/107 quick couplings listed can ALSO be used on the earlier BCS models 602, 604, 715, 725, 735 (and 737 and 605 models with SPLINE-ONLY PTO shafts), but it is NOT compatible with old-style “T-handle” BCS spline-shaft quick coupling individual components, which are out of production.

  **EXTRA NOTE**  Installation of this Grillo-manufactured quick coupling system on BCS models 725 and 735 requires removal of tow hitch from tractor.


PTO EXTENSION

Sometimes this accessory is necessary to help balance the tractor properly with particular lightweight implements by simply extending the PTO mount and therefore moving the implement weight further from the axle, which is the “fulcrum” of the tractor, and therefore achieving balance through leverage.  Especially necessary when heavier engines, such as diesels, are used.  Occasionally the PTO extensions are also used to simply gain more clearance between the implement and the wheels, especially when larger-than-standard wheels are desired for the tractor.  Be sure to ask if any of these extensions are required for the tractor and/or implements you purchase. These accessories can be attached to the tractor OR the implement, whichever is more convenient. 
Available in 3” lengths; can be coupled together if needed for longer lengths. (some 6” lengths may be available, but technically these have been discontinued)

ITEM

FITS

ITEM NUMBER

RETAIL

SALE

3” PTO extension

Grillo Splined PTO

9C1512

$70

$65

BCS 718 - 853

922.90829

$95

$90

BCS 745 - 945

922.48748

$100

$95

BCS 946 - 948

922.90876

$137

$130

PTO ADAPTERS

Several adapters available to serve a variety of functions:

ITEM

FITS

ITEM NUMBER

RETAIL

SALE

PTO Adapter 1

BCS splined tractor to 3-jaw implement

922.90832

$69

$65

PTO Adapter 2

BCS 3-jaw tractor to splined implement

922.90831

$69

$65

PTO Adapter 3

Adapts Grillo G131 to smaller Grillo PTO

9C2012-LSR

$135

$125

PTO Adapter 4

BCS PTO adapter 1 3/8”
6 spline shaft

922.90828

$157

$149


 

Adapter 1
Allows BCS implements with newer style (Post—1995) PTO shaft to attach to older BCS tractors (or, in some cases, certain Grillo Tractors)
 

Adapter 2
Allows BCS implements (or in some cases certain Grillo implements) with older-style splined (Pre-1995) PTO shaft to attach to new BCS tractors


Implement End                        Tractor End


Adapter 3
Adapts the G131 Grillo to the smaller series Grillo PTO and is necessary when using some implements on the G131 (cutter bar mowers, log splitter, chipper/shredder, power sweeper, scraper blades, fertilizer spreader, lawn mower, Disk mower, hayrake and baler…may have to be used in conjunction with Adapter 1 for some of these applications)
 
 

Adapter 4
Converts the current BCS PTO mount to a 6-spline, 1 3/8” shaft, identical to the 540 rpm shaft of any full-size tractor. Allows certain low-power-requirement tractor PTO type stationary implements to be powered by your walk-behind such as sprayer pumps, grain elevators, small PTO generators, etc.  Keep in mind, though, that the BCS PTO turns 990 rpm at max engine speed, so if you are powering an RPM-sensitive implement, you cannot run the engine over ½ throttle!!  This accessory can be used on Grillo G85 - 107 in conjunction with Adapter 1.

 

PLASTIC PTO COVER
 
When you are towing a trailer or using your walk-behind for some other application where the PTO does not have anything hooked up to it.  This handy cover just keeps the dirt and dust out of the PTO coupling area.  It is made to slip over the implement mounting studs on the BCS tractors or the Grillo G85 — 107, but with a couple “twist ties” it will fit nicely over the end of the BCS female (tractor) quick coupling receiver.
 
PTO Cover: Sale $1 (Free with a new tractor by request)  

 WHEEL ACCESSORIES
 
AXLE EXTENSIONS (sold in pairs)
 
Available in a variety of lengths to customize the track width of your walk-behind tractor.  Sizes range from 5” to 16” total extension (2.5 to 8” per side), plus, we now offer spin-out adjustable axle extensions with an 8 inch range of adjustment, variable in 1/2” overall increments.  Use these accessories to increase stability on slopes, or simply to customize the wheel track to a particular application (i.e. straddling a bed—with the 16” extensions and 10” rim [or larger] wheels, the tractor will straddle a 30” wide bed)  NOTE:  16” total extension is the maximum recommended.  Adding additional extensions will void tractor axle warranty.
 
SIZES LISTED ARE TOTAL EXTENSION (BOTH SIDES COMBINED)

ITEM

FITS

ITEM NUMBER

RETAIL

SALE

5” Axle Extensions

BCS

922.43685

$48

$45

Grillo

937112

8” Axle Extensions

BCS & Grillo

ET0080

$85

$75

12” Axle Extensions

BCS & Grillo

ET0090

$90

$80

16” Axle Extensions

BCS & Grillo

ET0100

$95

$85

Adjustable Axle Extensions 8” - 18”
NOTE: these are made by Grillo, and if mounting to a BCS machine, the holes in the wheel rims will need to be drilled out to 1/2"

BCS & Grillo

937312

$239

$215

Free Wheel Device
(also extends wheels 5" total)

BCS

922.43817

$226

$215


WHEEL WEIGHTS (sold in PAIRS)

The pulling or pushing power of a walk-behind tractor is directly related to Traction, and traction is dictated mainly by weight.  Wheel weights are the best means of improving traction because they add weight without changing the balance of the machine.

Both BCS and Grillo offer factory cast-iron weights, which are fine, if you don’t mind them being quite hard to take on and off (because the mounting nuts are recessed way down in blind holes) AND being over $2 per pound for Italian cast iron.


ITEM

FITS

ITEM NUMBER

RETAIL

SALE

Weights 8” wheels (48 lbs. pair)

BCS 8” rims

922.43686

$289

$146*

Weights 10” wheels (66 lbs. pair)

BCS 10” rims

922.48715

$345

$328

Weights 12” wheels (150 lbs. pair)

BCS 12” rims

922.48720

$490

$465

Weights 10” wheels (45 lbs. pair)

Grillo 10” rims

9G1212

$185

$170

Weights 12” wheels (80 lbs. pair)

Grillo 12” rims

9G2412

$350

$290

Barbell Weight Plates (various sizes)

barbell wheel weight hangers

ET0000

$1.30/lb

$1.20/lb


 * Limited availability at this price

OR, we offer “Barbell weight hangers”, which bolt onto the wheel-mounting studs of the tractor (the wheel does not have to be removed to install them; just the lug-nuts) and they accept standard 1” hole barbell weight plates.  The weight plates themselves can be removed or installed with a single pin, and since we offer the hangers in various post lengths, you can actually get far more weight on the tractor than with the “factory” weights … 100 lbs max per wheel!     The “hangers” can stay on the tractor even when the weight plates are removed…although if you have one of the longer lengths, the posts may stick out and get in the way sometimes…If so, they are easily removed.     We also now offer the 1” hole barbell weight plates as well at competitive prices, and we can provide the optimum plate size combination according to your wheel size and implement application.

ITEM

FITS

ITEM NUMBER

RETAIL

SALE

Set of Barbell Weight Hangers
 SHORT (8”)

BCS

ETBWBCS-S

$50

$49

Set of Barbell Weight Hangers
LONG (10”)

BCS

ETBWBCS-L

$50

Set of Barbell Weight Hangers - Short (8”)

Grillo

ETBWG-S

$70

$69

Set of Barbell Weight Hangers - Long (10”)

Grillo

ETBWG-L

$70



NOTE: Barbell weight hangers cannot be installed in conjunction with Adjustable axle extensions!

WHEELS & TIRES (sold in PAIRS)

Whether you are needing a second set of wheels to put “duals” on a tractor, a new set of wheels for an old machine or just want a larger set of wheels for extra ground clearance and/or greater ground-speed, the following is our selection of tire sizes for our walk-behind tractors.   NOTE #1: for a nominal up-charge, most of our new tractors can be fitted with larger-than-standard wheels at the time of purchase. (these prices are down at the bottom of our tractor prices page) …make sure you ask us about what wheel size is best for your application.   NOTE #2: “Adjustable track rim” wheels have a separate inner hub and outer rim, which can be assembled in anywhere from 2 to 4 different positions, depending on what the tractor will accommodate, to achieve different wheel widths.  To see these measurements, go the Walk-behind tractors page and look at the specs of a tractor that has standard wheels of the size you are interested in.  NOTE #3: If you just need an individual replacement tire or tube for your old rim, these items are considered “spare parts” and we stock all sizes.

Click HERE for a Wheel Spacing chart


Wheel & rubber tire sets

ITEM

MANUFACTURER

ITEM NUMBER

RETAIL

SALE

4x8x16” fixed rim, tractor tread

BCS/Grillo

922.43680

$185

$176

6.5x8x16” fixed rim, wide tractor tread

Grillo

912712

$235

$215

4x10x18” fixed rim, tractor tread

BCS/Grillo

900312

$215

$205

4x10x18” adjustable rim, tractor tread

BCS/Grillo

922.48332

$256

$243

5x10x20” adjustable rim, tractor tread

BCS/Grillo

922.48334

$312

$295

5x12x22” adjustable rim, tractor tread

BCS/Torreggiani

922.44809

$365

$345

6.5x12x23” adjustable rim, tractor tread

BCS/Grillo

922.44806

$495

$395

10x8x19” Turf Tires and rims

Grillo

911712

$330

$290

10x8x20” Balloon Tires, tractor tread

Grillo

913212

$395

$355



FOAM-FILLED TIRE OPTION:
On replacement wheels, OR on new tractors, we now offer FOAM-FILLED tires on some of our most popular sizes.  Foam-Filling means the tires are filled with Solidifying rubber foam, so essentially they become solid rubber wheels once filled.   The advantages of Foam-Filling are:
 
-- NO FLATS---EVER!!
-- More weight & traction
-- No tire maintenance
 
PRICES (prices reflect ADDITION to normal tire cost):
5x10x20 (adds 50 lbs. of weight per pair) :   $110
5x12x22 (adds 80 lbs. of weight per pair) :   $130
6.5x12x23 (adds 80 lbs. of weight per pair) : $145

STEEL WHEELS with 1” deep cleats—for extra traction in soilworking applications (can be used for other applications as well, if you don’t mind them tearing up the sod!)








ITEM

MANUFACTURER

ITEM NUMBER

RETAIL

SALE

17” Steel Cage Wheels

BCS

922.57779

$206

$195

19” Steel Cage Wheels

BCS

922.42474

$258

$245

19” Steel Cage Outriggers

BCS

922.42460

$145

$138

20.5” Steel Cage Wheels 

Grillo

927212

$285

$260

20.5” Steel Cage Outriggers

Grillo

922212

$165

$145

22” Steel Cage Wheels 

BCS

922.49993

$310

$295



TIRE CHAINS
For extra traction in snow & ice, we now offer tire chains with 2-link cross chain spacing for the following tire sizes (chains for 10” & 12” tires INCLUDE a set of spring-loaded tensioners):

ITEM

MANUFACTURER

ITEM NUMBER

RETAIL

SALE

4x8x16”

various

1301L

$59

$49

5x10x20”

various

53131MOD

$95

$90

5x12x22”

various

53131

$95

$90

6.5x12x23”

various

53131

$95

$90

OTHER TRACTOR ACCESSORIES
 
TOW COUPLER
 

This accessory hitches to the tractor tow hitch (located just above the PTO mounting on all current models we offer) and terminates in a 1 1/8” solid steel rod protruding away from the tractor, with a hole drilled left-to-right through the rod.  This is the accessory used by BCS or Grillo to hook a trailer behind the tractor: the Italian-made trailers have a tongue made out of essentially a pipe with a hole drilled through left-to-right toward the end; this tow coupler simply slides into the pipe/tongue and is locked in place by a pin slid through the holes.  The holes on the tongue are typically either oversized or “ovalized” a bit to allow the coupler to “twist” in the pipe/tongue somewhat, and provide some oscillation so that all 4 wheels of the tractor/trailer stay evenly on the ground even on uneven terrain.  Note that the tow hitch/tow coupler interface is a double clevis, meaning when the two are hooked together it operates like a door hinge: pivoting side-to-side but not up and down.  This is important, because with a walk-behind tractor, you only have one axle on the tractor; whatever implement is attached to the tractor provides the needed stability to keep the engine up off the ground…this double-clevis type hitch provides just this, allowing the tractor/implement to steer by pivoting on the axis of the vertical pin attaching the tow coupler to the tractor hitch, and not allowing the engine to flop down on the ground whenever the operator lets go of the handlebars!   This is why a ball-type hitch (like a truck or car has) WILL NOT work on a walk-behind tractor: there is no vertical stabilization provided by the hitch.

The GOOD news is that this tow coupler will fit nicely inside of a piece of 1 ¼” steel water pipe, so that by affixing a length of such pipe with a hole drilled in it for the locking pin to the tongue (by bolting, welding, clamping…actually we find that 1 ½” muffler pipe clamps usually work very well for attaching a length of this pipe to an implement tongue)  of any implement designed for use behind a lawn & garden tractor or ATV will allow that implement to be attached comfortably behind your walk-behind tractor: Lawn rollers, aerators, seeders, spreaders, carts…we even have two customers who adapted old horse-drawn dump-type hayrakes to be pulled by their walk-behind tractors.

4 types: so specify what tractor it needs to fit:

FITS

ITEM NUMBER

RETAIL

SALE

BCS 718, 722, 725, 732, 735, 739

922.59500

$58

$55

BCS 737, 749, 750, 830, 850, 852, 853, 946, 948,
SOME 605 (if 605 is equpped with tow hitch)

922.47720

$60

$57

Grillo G85 - G110

9F4212

$55

$52

Grillo G131

9F4712

$75

$65



Note: The earliest model BCS 605 tractors DO NOT have a clevis hitch mounted on the tractor to accept the Tow Coupler; to use a tow coupler on these tractors use the Tow Hitch below and the Type 1 tow coupler above.


                                                                       
TOW HITCH
This accessory is intended to provide a tow hitch on Walk-behind tractors NOT already equipped with one from the factory: These would be the older BCS models 710, 715, 716, 720 and 730 and some early 605s.  It bolts to the PTO mounting, and the “type 1” tow coupler will hook up to it.  (We also have it a configuration that will plug into a post-1995 BCS quick-coupling receiver.)






ITEM

MANUFACTURER

ITEM NUMBER

RETAIL

SALE

Tow Hitch - bolt-on type

Aldo Biagioli & Figli

BP80

$40

$35

Tow Hitch - for BCS QH

Aldo Biagioli & Figli

BP80-BQ

$60

$55

Tow Hitch - for Grillo QH

Aldo Biagioli & Figli

BP80-GQ

$60

$55



GRASS / DEBRIS SCREEN

Keeps debris (particularly cut grass) from getting sucked into the engine with the cooling air and stopping up the cylinder cooling fins.  Mounts over recoil starter housing, where the cooling air is sucked into all small engines.  If you have a rotary mower (lawn, flail or brush mower) on your Walk-behind tractor, the grass is cut up into small enough pieces that if you DON’T have this screen, you MUST take the engine cooling shrouds off at least twice a year to clean out the grass that has gotten sucked in there; failure to clean it out will result in engine damage due to overheating.  If this screen is present, grass builds up the outside of it like a lint screen in a dryer.  Since when you are mowing, you are directly behind the engine, you can easily reach down occasionally and brush it off with your hand.
This is one of our most important and best-selling accessories, and the crazy thing is: None of the engine manufacturers typically selling in the USA offer this type of screen for their horizontal (side) shaft engines; we purchase it from a European engine manufacturer (Lombardini) and adapt it to the Honda, Briggs and Kohler engines it can be made to fit.   This item is an Earth Tools Exclusive…any other dealer who offers it purchases it from us.

ITEM

FITS

ITEM NUMBER

RETAIL

SALE

Grass/Debris Screen

Honda 11 & 13hp engines

6927.358H

$65

$59

Grass/Debris Screen

14hp Subaru/Robin engine

6927.358S

$75

$69

Grass/Debris Screen

8, 11 & 12hp Kohler diesel engines

6927.358D

$75

$69


 

“ENGINE” WEIGHTS

When using a walk-behind tractor with a heavy soil-working implement, extra weight can be added to the front (engine) bumper to help offset the extra weight of the heavy implement. (Examples of these implements would be Power Harrows, Spaders, Stoneburier tillers, etc.) Below are several options, based on tractor type:

J-bolt-kit1. J-Bolt kit. This is the most popular option for BCS tractors with tubular-steel bumpers. It allows the operator to clamp any weight/weights with at least a ½” diameter hole onto the front of the engine bumper. (The most popular weights for this are 1” center hole “barbell” weight plates, as pictured, which are available virtually anywhere.) Maximum recommended total weight is 60 lbs., can consist of anywhere from one to 4 plates of varying weights. (That is, the bolt is long enough to accommodate up to 4 plates…however, if you are just using one or two plates, and the “extra” bolt sticks out too far and gets in the way, it can be cut shorter with a hacksaw.) Comes on and off the bumper easily, with just one ¾” nut. (KIT DOES NOT INCLUDE WEIGHTS!! Weight plates available from us separately, or, most likely you can find them locally, new or used).


Suitcase style weightSuitcase style weight2. “Suitcase” style weight for Grillo G85-107 GAS. This weight system fits Grillo G85-G107 with GAS engines. It just “hooks” over the tubular bumper bar and hangs there by gravity. Weighs 20 lbs, and an additional 20 lb. plate can be bolted onto the front of it as well. (For Grillo tractors with DIESEL engines: the bumpers on the diesels already have extra mounting holes in the front, so 1” center-hole Barbell-type weight plates can be easily bolted onto them using a bolt, nut and large washers. 50 lbs. max. recommended weight.)


Front weight kitFront weight kit3. Front-Weight kit for Grillo G110 GAS. The weight system for G110 consists of 6 plates, which total 36 lbs. With the bolts & nuts provided, all the plates can be mounted, but if you want to “customize” the weight amount, just use shorter bolts and don’t use all the plates. (For Grillo tractors with DIESEL engines: the bumpers on the diesels already have extra mounting holes in the front, so 1” center-hole Barbell-type weight plates can be easily bolted onto them using a bolt, nut and large washers. 50 lbs. max. recommended weight.)


engine_weights4. Clamp-on Front-Weight kit. Berta Franco, the manufacturer of our Rotary Plows and Flail mowers, offers a kit which consists of two clamp-on mounting brackets and three weight plates totaling 40 pounds. The brackets will clamp to any of the tubular bumpers on any of the tractors we offer. This kit is not too popular, as it is harder to install & remove.



5. Factory-made Front weight kit for BCS tractor model 750. (no photo) This kit is the “factory-made” option for attaching engine-side weight to the BCS 750 tractor, it mounts to brackets already provided on the 750 on the front/top of the transmission housing, right behind the engine. It is 76 lbs., but it is less effective than weights mounted to the engine bumper, since the bumper is further from the “fulcrum point” of the tractor (the axle). This kit is very nicely made and attaches/detaches relatively quickly with 6 bolts (provided), but it is pricey. Most folks will want to go with one of the options above, unless you just want everything “BCS original”.


ITEM

FITS

ITEM NUMBER

RETAIL

SALE

J-Bolt Kit for Barbell Engine Weights

All BCS tractors with tubular bumpers

ET JBOLT

$7

$6

20lb. "Suitcase" weight for Grillo Gas

Grillo GAS tractors G85-G107

ET GR FRTWT

$55

$50

Additional 20lb weight for above

Above Suitcase weight, comes with mounting bolts

ET GR FRTWT-ADD

$37

$35

Grillo G110 weight kit, 36lbs

Grillo G110 Gas

ET-G110 FRTWT

$55

$50

Berta Engine Weight kit, 40 lbs.

All tractors with tubular bumpers

ET WT-KT

$120

$90

Factory made 76 lb.front weight kit

BCS model 750

922.C0036

$125

$125

 

LOADING RAMPS
For years, customers have asked us: “Do you have ramps I can use to get my walk-behind tractor in & out of my truck/van?” Well, the answer is finally YES!  We now offer these American-made, steel folding ramps that are rated at 1200 lbs. load limit per pair.  Contoured upper portion helps get equipment in & out of vehicle safely without the ramps wanting to fall off the tailgate.  Ramps have “punched hole” raised traction knobs so tires (and your shoes!) can get a good grip going up or down, and smaller caster-type wheels will not fall into the big “gaps” that rung-style ramps have.  The folding feature allows these ramps to fit into smaller spaces for storage.    Full length is 84”, folded length 63.5”. Weight: 58 lbs. for the set.



ITEM

MANUFACTURER

ITEM NUMBER

RETAIL

SALE

Steel loading ramps, folding,
1200 lb. capacity

Ohio Steel

OS 10-84C

$129

$98



BATTERY “MAINTAINER” TRICKLE-CHARGER
The most common problem with electric-start equipment is that when is sits around for several months, the batteries go dead (particularly on equipment with small batteries, that are only used seasonally…lawn & garden equipment, motorcycles, etc.). However, this trouble can be avoided by trickle-charging the battery during it’s “off” season; the continuous low charge keeps the plates in the batteries from oxidizing, and will actually increase battery life significantly.  This unit will work on any 12-volt battery, and has built-in circuitry that prevents overcharging…you can hook it up, plug it into any standard 110V electrical outlet, and forget about it for months, and your battery is always ready to go when you are.   This unit sells retail for $39.95, but when purchased WITH an electric-start walk-behind tractor, we offer it for $30.

 


ITEM

FITS

ITEM NUMBER

RETAIL

SALE

Battery Tender Trickle-charger

All 12 volt batteries

ET BTRYCHRGR

$39.95

$38 (or $30 with elec. Start tractor purchase)


I

BRAKE KITS

Available in two types:

Single-wheel kit: For non-differential tractors.  When the tractor does not have a differential, both wheels are fixed together through a solid axle, so stopping one wheel stops the other. 

Double-wheel kit: For tractors with differential but without factory-equipped brakes (such as the Grillo G85d or pre-2011 BCS 732 [post-2011 732s have handlebars that will not accept the brake controls]). 

Kits are complete with brake drums, brake shoes, backing plates, actuator lever/s and cable/s to clamp on handlebars and all mounting hardware.

ITEM

FITS

ITEM NUMBER

RETAIL

SALE

Single Wheel

BCS 712 - 722

922.90833

$75

$70*

Double Wheel

BCS 732 (pre-2011)

922.59505

$189

$179

Grillo G85d G107

978111



* Limited quantity available at this price

Note: If you want us to install one of these kits on a new tractor you are purchasing from us, a labor charge of $20 per wheel will apply.

IMPLEMENT ACCESSORIES
 
TILLER DEPTH CONTROL WHEEL (for Shallow tillage)
 
One of the challenges people face with these high-speed tillers is getting them to till at consistently SHALLOW depths, which is desirable for weed control.   We now manufacture this handy little gauge wheel assembly, which inserts into the same little receiver under the tiller hood that the Tiller Transport wheel and Hiller/Furrower mount into…the wheel can be adjusted in two ways: By running the 2 large nuts up or down the threaded rod (requires a 1 1/8” wrench), or by moving the wheel unit up or down on the mounting frame (4 sets of holes, requires qty. 2 – 13mm wrenches—NOTE: these fasteners are not quite tight when we ship this accessory, because we figure you’ll probably be adjusting it).

Tilling depth can be adjusted in the range of 0 to 3 inches deep.  (Adjustments will vary depending on tractor wheel size, soil type, etc…you just have to play with it a bit.)  The 2” wide wheels do make a couple small tracks behind the tiller, but this is typically not an issue when using the tiller for weed control.  Fits BCS and Grillo tillers.

Item

Manufacturer

Item Number

Retail Price

Sale Price

Tiller Depth Gauge Wheel Assy.

Earth Tools

TLR DPTH WHL

$55

$50



TILLER TRANSPORT WHEEL

When transporting the tractor with tiller implement installed, this wheel holds tiller up off the ground.  Especially good for transporting longer distances over concrete, asphalt, gravel, etc.  






ITEM

MANUFACTURER

ITEM NUMBER

RETAIL

SALE

Tiller Transport Wheel

BCS

922.42465

$40

$38

Grillo

9C7012

$40

$36




Box Scraper Ends (Fit 36" Dozer/Scraper Blade)
This Earth Tools Exclusive kit converts the BCS brand Dozer/Scraper Blade to a Box Scraper (also called a "Grader Box")...EXTREMELY handy for grading of dirt or gravel.  Box Scraper Ends attach at each end of blade with 2 bolts & nuts each, so removal or installation is only a few minutes. (If you are purchasing a new 36" blade AND a Box End kit from us at the same time, we will pre-drill the mounting holes needed in the blade at no extra costIf you are purchasing the Box End kit for an existing blade you already have, you will have to drill the mounting holes yourself [requires a drill with a 13/32 drill-bit].)


Leveling Plate (for 36" Dozer/Scraper Blade)
We now offer another Earth Tools Exclusive Accessory: Since the 36" Dozer/Scraper blade does not offer any "rotational float". this becomes a problem when used on a tractor with larger-than-standard wheels: anytime you "pivot" the blade to one side, one side of the blade is higher than the other, because of the "tilted" angle the of tractor down towards the blade when large wheels are used.  So, we have devised a "Leveling Plate", which offsets the blade frame mounting to the implement mount of the tractor, and thus keeps the horizontal plane of the blade level. The plate has 3 different offset positions to handle any wheel height.

box-ends
 

ITEM

MANUFACTURER

ITEM NUMBER

RETAIL

SALE

Box End Kit

Earth Tools

ET0172

$80

$70

Leveler Plate

Earth Tools

ET0170

$34

$29


EARTH TOOLS, Inc.
1525 Kays Branch Road
Owenton, KY  40359

(502) 484-3988 tel.
(502) 484-3357 fax.

 

NOTE REGARDING
HOLIDAY CLOSINGS:

  Annual Winter vacation: Closing Dec. 24th,  re-opening
Jan. 4th, 2016.

Also closed MLK Day, Memorial Day, July 3, Labor Day and Nov 26 & 27 for Thanksgiving.