Replacement Tiller Tines

There are 4 different tine styles that BCS sold as 'standard' tines, and we want to be sure we send you the correct ones for your tractor.  When ordering, please provide the answers to the below 5 questions (You can also view PICTURES of the various tine styles, with measurements, at  THIS LINK (click here):

  1. Tractor Model Number (optional, but it may save time)
  2. Total Number of tines.
  3. Depth adjustment.  Does your tiller have a depth adjustment bar that comes through the top of the tiller hood?
  4. Rear Flap.  Is the rear flap of your tiller mounted to hinges with cotter pins or does it simply hang on two hooks?
  5. Bolt pattern. Does your tiller have: 4 bolts per set of 4 tines (tines overlap or “criss-cross” each other where they bolt on) OR: 8 bolts per set of 4 tines (tines do not overlap each other where they bolt on).

The above information will enable us to send you the correct tines for your machine.  For reference and comparison, below are the prices of the various sizes and types (NOTE: “Rental” tines are wider and thicker, and typically result in longer service life.  However, because they are thicker, the performance in clay soils is not as good…imagine trying to cut something with a thin knife versus a thicker one: the thinner one cuts easier and with less energy used.  We typically only recommend Rental tines for applications with highly abrasive soils [sandy soils, etc.] where the service life of the standard tines is just too short to be practical.):

Size

Number
of tines

With bolts & nuts

Without bolts & nuts

18” std. or ‘wide’

12

$70

$62

20” BCS std. or ‘wide’ / 22” Grillo

16

$86

$78

20” rental (BCS)

16

$145

$135

22” Grillo (Hard Faced)

16

$129

$117

26” BCS std. or ‘wide’ / 27” Grillo

20

$105

$95

27” Grillo (Hard Faced)

20

$158

$143

26” rental (BCS)

20

$180

$165

30” BCS std. or ‘wide’ / 31” Grillo

24

$135

$125

31” Grillo (Hard Faced)

24

$195

$185

30” rental (BCS)

24

$223

$206

32” Grillo G131

20

$185

$160

33/34” BCS

20

$235

$185


 
If you have a Mainline machine manufactured by SEP (model 1300, 1500, Ladybug, Plainsman, Mountaineer, 2+2, Bizzy Buddy, Etc.)  we can usually cross-reference tines for your machine as well.  Call with information on questions 1, 2 and 5 above AND a measurement of the center-to-center bolt-hole spacing on your old tines, and we will figure it out and give you a price.