G U A R A N T E E

YOUR SOURCE FOR
bcs tillers, bcs sickle bars, bcs lawn mowers, bcs snowblowers, bcs brush mowers, bcs sweepers, bcs chipper / shredder
bcs attachments & bcs accessories
AND
 rotary plows, mini hay balers, hay rakes, spaders, cultivators, flail mowers, seeder, potato digger plow, utility trailers & more!

ACME ENGINE PARTS
Parts for Acme Motori

Most BCS Machines sold in America between 1975 and 1990 came with an Italian built ACME engine.  (Exception: Pre-1992 200 Series BCS machines [models 201, 203, 204 & 205] came with a BCS gas engine, which is identified by the oil fill being on the same side of the engine as the carburetor and muffler. We have parts for these, too!) The ACME engine brand was purchased by Lombardini in 1997, and then Lombardini was purchased by Kohler in 2007. Kohler has technically discontinued the ACME brand name, but most ACME parts are still in production. (Unfortunately, some parts have been discontinued...some carburetor parts, for example.) We have been ACME distributors since 1980, and we are the last remaining ACME parts distributor in North America. We keep over $10,000 in ACME parts in stock.

There were many different models used as well as variations of models. Ordering parts can be very confusing, so we don’t put Parts Lists online. If you take a few minutes to get the information on the following checklists, and call us, we will send you the right parts the first time or we will pay the return shipping.

We also have a large selection of USED ACME engine parts, available at half price (or less) of new parts.

Call to order: (502) 484-3988. Ask for Joel...he is the resident expert in North America on ACME engines (37 years experience), and also the only one who is familiar with the used parts inventory at Earth Tools. You can also make ACME parts requests to Joel by e-mail at earthtools@hotmail.com (due to e-mail volumes, and how busy Joel is in general [he is the owner of the company], it may be a day or two before you hear back)

Look over the below check-list and make notes about what your engine has in each "section" before calling us. Print out the list if necessary.

GASOLINE ENGINE CHECKLIST

Section 1

MODEL

The Model Number Plate is riveted onto the fan shroud or cylinder shroud on the oil fill side of the engine.  The following ACME gas models were used on BCS 2-wheel tractors:

  • A 220 (B)
  • AL 215, 290, 330 (W or B)
  • ALN 215, 290, 330 (W, B, or WB)
  • AT 330 (B)
  • VT88 (W)


Section 2

STARTING TYPE

  • Rope (the kind you wind up every time)
  • Recoiling Starter with Rope
  • Recoiling Starter with Cable
  • Electric Starter


Section 3

IGNITION TYPE

  • Points & Condenser Ignition (if equipped, Points & condenser located in square box with a button on it directly below carburetor and muffler)
  • Solid State Electronic Ignition (Models A 220 & AT 330 came only with this)


Section 4

AIR FILTER TYPE

  • Dry Paper Cartridge Type (with or without foam prefilter)
  • Oil Bath Type (has washable plastic filter element)


Section 5

FUEL TANK

  • Metal with Metal Cap
  • Metal with Plastic Cap
  • Plastic with Plastic Cap


Section 6

MUFFLER TYPE

  • Small (Horizontal) Canister Type
  • Large (Vertical) Canister Type
  • Large Rectangular Box Type (sits partially over top of air cleaner housing)


Section 7

CARBURETOR

  • With Metal Float Bowl
  • With Black Plastic Float Bowl



DIESEL ENGINE CHECKLIST

Section 1

MODEL

  • ADN 37
  • ADN 37/2
  • ADX 300
  • ADX 370
  • ADN 43
  • ADN 48
  • ADN 54


Section 2

STARTING TYPE

  • Rope
  • Recoil
  • Hand Crank
  • Electric


EARTH TOOLS, Inc.
1525 Kays Branch Road
Owenton, KY  40359

(502) 484-3988 tel.
(502) 484-3357 fax.

 

NOTE REGARDING
HOLIDAY CLOSINGS:

  Annual Winter vacation: Closing Dec. 24th,  re-opening
Jan. 4th, 2016.

Also closed MLK Day, Memorial Day, July 3, Labor Day and Nov 26 & 27 for Thanksgiving.